# ncs-setup `ncs-setup` - Command to create an initial NCS setup ## Synopsis `ncs-setup --dest Directory [--netsim-dir Directory] --force-generic [--package Dir|Name...] [--generate-ssh-keys] [--use-copy] [--no-netsim]` `ncs-setup --eclipse-setup [--dest Directory]` `ncs-setup --reset [--dest Directory]` ## Description The `ncs-setup` command is used to create an initial execution environment for a "local install" of NCS. It does so by generating a set of files and directories together with an ncs.conf file. The files and directories are created in the --dest Directory, and NCS can be launched in that self-contained directory. For production, it is recommended to instead use a "system install" - see the [ncs-installer(1)](/guides/nso-6.6/resources/man/ncs-installer.1.md). Without any options an NCS setup without any default packages is created. Using the `--netsim-dir` and `--package` options, initial environments for using NCS towards simulated devices, real devices, or a combination thereof can be created. This command is not included by default in a "system install" of NCS (see [ncs-installer(1)](/guides/nso-6.6/resources/man/ncs-installer.1.md)), since it is not usable in such an installation. The (single) execution environment is created by the NCS installer when it is invoked with the `--system-install` option. ## Options `--dest` Directory > ncs-setup generates files and directories, all files are written into the --dest directory. The directory is created if non existent. `--netsim-dir` Directory > If you have an existing ncs-netsim simulation environment, that environment consists of a set of devices. These devices may be NETCONF, CLI or SNMP devices and the ncs-netsim tool can be used to create, control and manipulate that simulation network. > > A common developer use case with ncs-setup is that we wish to use NCS to control a simulated network. The option --netsim-dir sets up NCS to manage all the devices in that simulated network. All hosts in the simulated network are assumed to run on the same host as ncs. ncs-setup will generate an XML initialization file for all devices in the simulated network. `--force-generic` > Generic devices used in a simulated netsim network will normally be run as netconf devices. Use this option if the generic devices should be forced to be run as generic devices. `--package` Directory | Name > When you want to create an execution environment where NCS is used to control real, actual managed devices we can use the --package option. The option can be given more than once to add more packages at the same time. > > The main purpose of this option is to creates symbolic links in ./packages to the NED (or other) package(s) indicated to the command. This makes sure that NCS finds the packages when it starts. > > For all NED packages that ship together with NCS, i.e packages that are found under $NCS\_DIR/packages/neds we can just provide the name of the NED. We can also give the path to a NED package. > > The script also accepts the alias `--ned-package` (to be backwards compatible). Both options do the same thing, create links to your package regardless of what kind of package it is. > > To setup NCS to manage Juniper and Cisco routers we execute: > > ``` > $ ncs-setup --package juniper --package ios > > ``` > > If we have developed our own NED package to control our own ACME router, we can do: > > ``` > $ ncs-setup --package /path/to/acme-package > > ``` `--generate-ssh-keys` > This option generates fresh ssh keys. By default the keys in `${NCS_DIR}/etc/ncs/ssh` are used. This is useful so that the ssh keys don't change when a new NCS release is installed. Each NCS release comes with newly generated SSH keys. `--use-copy` > By default, ncs-setup will create relative symbolic links in the ./packages directory. This option copies the packages instead. `--no-netsim` > By default, ncs-setup searches upward in the directory hierarchy for a netsim directory. The chosen netsim directory will be used to populate the initial CDB data for the managed devices. This option disables this behavior. Once the initial execution environment is set up, these two options can be used to assist setting up an Eclipse environment or cleaning up an existing environment. `--eclipse-setup` > When developing the Java code for an NCS application, this command can be used to setup eclipse .project and .classpath appropriately. The .classpath will also contain that source path to all of the NCS Java libraries. `--reset` > This option resets all data in NCS to "factory defaults" assuming that the layout of the NCS execution environment is created by `ncs-setup`. All CDB database files and all log files are removed. The daemon is also stopped ## Simulation Example If we have a NETCONF device (which has a set of YANG files and we wish to create a simulation environment for those devices we may combine the three tools 'ncs-make-package', 'ncs-netsim' and 'ncs-setup' to achieve this. Assume all the yang files for the device resides in `/path/to/yang` we need to * Create a package for the YANG files. ``` $ ncs-make-package --netconf-ned /path/to/yang acme ``` This creates a package in ./acme * Setup a network simulation environment. We choose to create a simulation network with 5 routers named r0 to r4 with the ncs-netsim tool. ``` $ ncs-netsim create-network ./acme 5 r ``` The network simulation environment will be created in ./netsim * Finally create a directory where we execute NCS ``` $ ncs-setup --netsim-dir netsim --dest ./acme_nms \ --generate-ssh-keys $ cd ./acme_nms; ncs-setup --eclipse-setup ``` This results in a simulation environment that looks like: ``` ------ | NCS | ------- | | | ------------------------------------ | | | | | | | | | | ---- ---- ---- ---- ---- |r0 | |r1| |r2| |r3| |r4| ---- ---- ---- ---- ---- ``` with NCS managing 5 simulated NETCONF routers, all running ConfD on localhost (on different ports) and all running the YANG models from `/path/to/yang` --- # Agent Instructions: Querying This Documentation If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question. Perform an HTTP GET request on the current page URL with the `ask` query parameter: ``` GET https://nso-docs.cisco.com/guides/nso-6.6/resources/man/ncs-setup.1.md?ask= ``` The question should be specific, self-contained, and written in natural language. The response will contain a direct answer to the question and relevant excerpts and sources from the documentation. Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.